Samsung SP56L7HX Projection Television User Manual


 
English - 38
Selecting the Sound Mode (depending on the model)
The “DUAL I-II” button displays/controls the processing and output
of the audio signal. When power is switched on, the mode is
automatically preset to either “Dual I ” or “Stereo”, depending on
the current transmission.
If the receiving conditions deteriorate, listening will be
easier if the mode is set to the
Mono.
If the stereo signal is weak and an automatic switching
occurs, then switch to the
Mono.
When receiving a mono sound in the AV mode, connect
to the “AUDIO-L” input connector on the side of the
television. If the mono sound comes out only from left
speaker, press the
DUAL I-II button.
Type of broadcast
Regular broadcast
(Standard audio)
Regular +
NICAM Mono
NICAM Stereo
NICAM Dual 1/2
Regular broadcast
(Standard audio)
Bilingual or Dual I/II
Stereo
On-screen indication
Mono
(Normal use)
NICAM Mono
Mono
NICAM Stereo
Mono
(Forced mono)
Mono
Dual I
Dual II
Stereo
Mono
(Forced mono)
NICAM Dual 1
NICAM Dual 2
Mono
NICAM
Stereo
A2
Stereo
1_BP68-00389B-00Eng 7/29/04 1:42 PM Page 38