Filter
Top Products
Selecting an External Signal
You can use PIP to view a signal from an external source, such as a VCR.
1
Press the Menu button. Move the joystick up or
down to select the “PIP”, then press the joystick to
enter.
Quick way to access the PIP source: Just press
“Source” on the remote control.
2
Move the joystick up or down to select the
“Source”.
3
Move the joystick left or right to select an external
signal. You can choose “Video”, “S-Video” or
“Component”.
The signal from these inputs will not appear if you
have not connected any equipment to the PDP’s
input jacks.
4
Press the Menu button to exit.
45
PIP
Move Select Exit
Select On
Source Video
Size Large
Swap
Location
PIP
Select On
Source Video
Size Large
Swap
Location
Move Select Exit
PIP
Select On
Source Component
Size Large
Swap
Location
Move Select Exit
AA68-01689A-3 4/12/05 10:50 AM Page 45