Samsung SPK4215M Flat Panel Television User Manual


 
59
In case various PDP sets are displayed using a multi cube, use this function to stop the remote control
operating by turning the PIN function ON for a specific set.
Do NOT forget the PIN number. If you forgot the PIN number, disconnect the power cord.
And the mode will automatically turn PIN OFF.
1
Press the Menu button. Move the joystick up or
down to select the “SETUP”, then press the joystick
to enter.
2
Move the joystick up or down to select the “Pin”,
then press the joystick to enter.
3
Move the joystick left or right to enter pin number.
4
Press the Menu button to exit.
Operating pins (when Pin No. is set to 001)
1. Press the Mute button.
2. Using the Number buttons, enter the pin number.
3. A remote control can’t run the PDP set.
Canceling pins (when Pin No. is set to 001)
1. Press the Mute button.
2. Using the Number buttons, enter the pin number.
3. A remote control can run the PDP set.
SETUP
Pin
Auto Pixel Shift Off
MEtEit
SETUP
Pin
Auto Pixel Shift Off
SETUP
Pin Function
Pin No : 001
Pin ON ID : 001
Pin OFF ID : 001
Setting the Pin
AA68-01689A-4 4/12/05 10:52 AM Page 59