Filter
Top Products
C
HAPTER THREE: TV OPERATION
3.5
OPERATION
4
While “Red” is highlighted, press
the ENTER( ) button: A crosshair
pattern will appear on the screen.
After moving the cursor to the
position you want to adjust using
the Up/Down/Left/Right
buttons on the remote control, adjust
Red Convergence by pressing the
CH and VOL +/- buttons.
5
If a horizontal red line is visible, use
CH buttons to move the line so
that it is superimposed on the hori-
zontal center-line (i.e., make a single
horizontal line that is as white as
possible.)
6
If a vertical red line is visible, use
the VOL +/- buttons to move the line
so that it is superimposed on the
vertical-center line (i.e., make a sin-
gle vertical line that is as white as
possible.)
Adjust Red Convergence
7
For ‘Blue’ adjustment, do the same as the above.
After the red convergence is correctly adjusted, press Menu to exit
all the menus.