Filter
Top Products
C
HAPTER THREE: TV OPERATION
3.13
OPERATION
Labeling the Channels
Use this feature to assign an easy-to-remember label to any channel (i.e., “CBS”, “ESPN”,
“PBS2”, CNN1”, etc.) A label consists of four fields, where each field is a letter, a num-
ber, “*”, or a blank. When the DISPLAY button is pressed, the channel label will appear
next to the channel number.
1
Press CH or CH to tune to the channel that will be labeled.
2
Press the Menu button.
Press the Down button to
select “Channel”, then
press the ENTER( ) button.
3
Press the Down button to
select “Labeling”.
Press the ENTER( ) button
to begin labeling.
The left-most field will be
highlighted.
(Each label has four fields.
See top paragraph.)
4
Press the Up or Down
button to select a letter,
a number, or a blank. (Press
the Up or Down button
results in this sequence:
A,B,...Z, blank, 0,1,...9).
5
Press the ENTER( ) button
switch to the next field,
which will be highlighted.
Select a second letter or
digit pressing the Up or
Down button, as above.
Repeat the process to
select the last two digits.
▼
Note: You cannot select
“Labeling” in the A/V mode.
Press the Menu button to exit the menu.