C
HAPTER THREE: TV OPERATION
3.9
3
The TV will begin
memorizing all of the avail-
able channels.
After all the available chan-
nels are stored, the Auto
program menu reappears.
Press the Menu button to
exit.
OPERATION
Storing Channels in Memory (Automatic Method)
▼
The TV automatically cycles
through all of the available chan-
nels and stores them in memory.
This takes about one to two min-
utes.
2
Press the Down button to
select “Auto Program”, then
press the ENTER( ) button.
1
First, select the correct sig-
nal source (ANT, STD, HRC,
IRC). See steps 1~2 on pre-
vious page.
Press the Menu button.
Press the Down button to
select “Channel”, then
press the ENTER( ) button
2
Press the Add/Erase button:
Repeatedly pressing this button will alternate between
“Added” and “Erased.”
Press the Menu button to exit.
You can view any channel (including an erased channel) by using the number
buttons on the remote control.
1
Use the number buttons to directly select the channel
that will be added or erased.
Adding and Erasing Channels (Manual Method)