Filter
Top Products
42
GB
VIDEO
LINE 1 IN
AUDIO
LR
UTO
NTSC
INPUT
ART INPUT
2
3
5
6
8
9
CH
STROBE AUDIO
AUDIO OUT (R)
AUDIO OUT (L)
VIDEO OUT
THROUGH
NTSC
NTSC4.43
MESECAM
PAL-M
SECAM
PAL-N
PAL
OUTPUT
Conversion Recording
You can convert the signal recorded on a tape to another format on
a second tape.
1 Connect the RCA Audio/Video cable to the input on the front of the
Samsung VCR (SV-7000W)
2 Insert the tape to record.
3 Connect the other end of the RCA Audio/Video cable to the output
connectors of another VCR (see page 39).
4 If you wish to convert from a tape recorded on NTSC to a PAL
recorded tape, insert the NTSC tape into the other VCR.
5 Press the INPUT button on the remote control to select the L1
input.
Result
: The display panel shows L1.
6 Press the PAL output system button on the front panel to select
the PAL system.
Result
: The display panel shows PAL.
7 Press the PLAY button of the other VCR.
8 Press the REC button of the Samsung VCR for at least one
second.
Result
: appears on the display panel, and recording begins.
➢ Follow these steps to perform conversion recording to other
formats.
5
6
00407A)SV-7000W-GB-4_sea 7/24/01 11:20 AM Page 42