Filter
Top Products
Install Manual
45
Relay out connection
Connect relays to R1 ~ R16 as illustrated in the figure below. The example shows how to
connect a warning light. Refer to the section on handling wiring for more information about
connecting or disconnecting relay wires.
Relay Out Settings
Relays can be triggered by following events; alarm sensor, motion detection, video loss, hard
disk fail, hard disk full, fan fail, password fail, and DDNS registration failure. Relays can also
be triggered remotely over the network using the Samsung Network Video Management
software.
For more information, refer to the user manual.
The user manual can be downloaded from www.samsungcctv.com
or on the CD
provided with the product.
3.3.3.3 D-I/O (Digital Input/Output) connection & settings
The D-I/O has 12 D-I/O ports and can accommodate 12 inputs/outputs. If sensors are working