Filter
Top Products
Install Manual
63
3.3.5 Remote monitoring & control
Connections can be made through Internet/Intranet by using the remote computer. This
connection can be used to control DVRs and monitor areas same as local spot.
3.3.5.1 Ethernet connection
(1) Shut the DVR power off.
(2) Connect the Ethernet cable to the DVR and hub or router.
(3) Turn the DVR power on.
To prevent damage to the DVR, turn the power on after connecting the Ethernet
cable. The Ethernet cable should be securely connected. After powering on the
DVR, check the connection.
3.3.5.2 Network settings
The following describes settings for Ethernet.
Refer to “User Manual” when using xDSL for detailed setup instructions.
The user manual can be downloaded from www.samsungcctv.com
or found on
the CD provided with the product.