Samsung SVR-480 DVR User Manual


 
User Manual
70
Motion Detection
This enables each channel or all channels to detect motion and notify users.
- Channel
Channel can be set to All or as follows.
SVR-3200: 1~32CH
SVR-1680C/1660C/1645: 1~16CH
SVR-960C/945: 1~9CH
SVR-480 : 1~4CH
- Sensitivity
Sensitivity can be set to Lowest, 1~10, or Highest for each channel.
- Area
Area is used to set the motion detection area.
If Channel is set to All, Area can be set to Set All or Unset All. When each channel is set
individually, Area can be set to Set All, Unset All or User Defined.
- User Defined
User Defined is only available when each channel is set individually. It is used to set an
area where you want to detect motion intensely.
It allows you to set a user-defined motion detection area. You can select one or more
motion detection areas out of the squares on the 22x15 grid.
The default setting is "Set All". Press the [Area Setup] button to open the motion detection
area setup window.
Users can specify motion detection areas on the screen.
The setup window composed of 330 squares in a 22x15 grid appears. Squares set as motion