Filter
Top Products
User Manual
88
Select COM1 or COM3.
※ Only Com1 is available for SVR-480.
Baud rate/Parity/Stop Bit/Data Bit
Enter the same settings as the ones for the selected keyboard.
6.8.4.1.4 PTZ
Select PTZ.
To control the PTZ operation via serial port, select PTZ in the Device options, and then set up
a serial port; refer to 6.8.4.2.2 PTZ (Serial).
To control the PTZ operation via coax protocol, you do not need to set up this option. (Refer to
6.8.4.2 PTZ.)
Device
Select a connected PTZ device.
6.8.4.2 PTZ
Two PTZ control methods are available: via serial port and coax protocol.