Filter
Top Products
82
5.8 Event setup
For event video recording, a lower menu like the one shown below can be setup. If ‘ENTER’ key, located in
the front of DVR, is pressed or if lower level menu is selected with the mouse, detailed items may be viewed.
5.8.1 Event
9 CHECK : Setup whether to check and store
events. [Application time setup] will be activated
only if [Event application time] is setup as [Time
application ].
9 MESSAGE [ON/OFF] : Select whether to display
event items on screen with text.
9 BUZZER : Select whether to sound the buzzer
when an alarm is generated.
9 SWITCH TO EVENT SCREEN : Setup whether
to convert the screen to the corresponding
channel when an event occurs.
9 EVENT DISPLAY MIN TIME : Min. retention time for the screen when an event occurs
(Amount of time to ignore an event if consecutive events are generated) is set within 0 ∼ 5
seconds.
9 EVENT DISPLAY MAX TIME : Max. retention time for the screen when an event occurs is set
within 0 ∼ 99 seconds or allways. [Maintain current state] During setup, display the screen in
which the event was generated continuously.
9 TEXT MONITORING : Determine whether to save characters input from external devices
through RS-232.
9 SENSOR TYPE : Setup the sensor type for the channel.(NO/NC)
NO : Open type (Normal Open) sensor.
NC : Closed type (Normal Close) sensor.
[Max. retention time] cannot be setup with a smaller value than [Min.
retention time].