Samsung SVR-950E DVR User Manual


 
86
5.9 Communication setup
Setup items needed to connect a computer to a network. Communication setup screen is as shown below. If
‘ENTER’ key, located in the front of DVR, is pressed or if lower level menu is selected with the mouse,
detailed items may be viewed.
5.9.1 NETWORK
9 DHCP [ON/OFF]: DVR is automatically
granted IP by DHCP server, it activates DHCP
function. ‘DHCP’ is used in LAN environment
where DHCP server operates. Generally for the
middle/large size, DHC server is operated by
LAN and for the small size, DHCP function of
IP router is generally used.
9 DHCP [ON/OFF] : Select whether to get the
IP address automaticcally using the Dynamic
Host Configuration Protocol.
9 TYPE [Ethernet/xDSL] : Select the network type connected to the DVR.
You are recommended to reboot your DVR when changing the type of
communication line.
Especially, when switching to Ethernet from xDSL or DHCP, first switch the
line type to Ethernet and the save the changes.
Then, reboot your DVR. When rebooting is completed, make sure to check
whether the line has been successfully switched to an Ethernet-type.
After that, enter the IP Address that you want to use.