Filter
Top Products
26
English
Basic Features
¦ Sound Systems, Etc.
O
MENU
m
→ Sound → ENTER
E
Broadcast Audio Options
■ Audio Language
(digital channels only)
Change the default value for audio languages.
✎
The available language may differ depending on
the broadcast.
■ Audio Format
(digital channels only)
Select the audio format.
■ Audio Description
(not available in all locations) (digital
channels only)
This function handles the Audio
Stream for the AD (Audio Description)
which is sent along with the Main
audio from the broadcaster.
✎
Audio Description (Off / On):
Turn the audio description
function on or off.
✎
Volume: Adjust the audio description volume.
Additional Settings
(digital channels only)
■ DTV Audio Level (MPEG / HE-AAC): This function
allows you to reduce the disparity of a voice signal
(which is one of the signals received during a digital TV
broadcast) to a desired level.
✎
According to the type of broadcast signal, MPEG
/ HE-AAC can be adjusted between -10dB and
0dB.
✎
To increase or decrease the volume, adjust
between the range 0 and -10 respectively.
■ Dolby Digital Comp (Line / RF): This function minimizes
signal disparity between a dolby digital signal and a
voice signal (i.e. MPEG Audio, HE-AAC, ATV Sound).
✎
Select Line to obtain dynamic sound, and RF
to reduce the difference between loud and soft
sounds at night time.
Line: Set the output level for signals greater or less than
-31dB (reference) to either -20dB or -31dB.
RF: Set the output level for signals greater or less than
-20dB (reference) to either -10dB or -20dB.
Speaker Settings
■ Auto Volume (Off / Normal / Night): To equalize the
volume level on each channel, set to Normal.
Night: This mode provides an improved sound
experience compared to Normal mode, making almost
no noise. It is useful at night.
Reset Sound (OK / Cancel)
Reset all sound settings to the factory defaults.
¦ Selecting the Sound Mode
t
When you set to Dual
fg
, the current sound mode is
displayed on the screen.
Audio
Type
Dual
f
-
g
Default
A2
Stereo
Mono Mono
Automatic
change
Stereo
Stereo ↔ Mono
Dual
Dual
f
↔ Dual
g
Dual
f
NICAM
Stereo
Mono Mono
Automatic
change
Stereo
Mono ↔ Stereo
Dual
Mono ↔ Dual
f
Dual
g
Dual
f
✎
If the Stereo signal is weak and an automatic switching,
occurs, then switch to the Mono.
✎
Only activated in stereo sound signal.
✎
Only available when the input Source is set to TV.
AD/SUBT.