Filter
Top Products
34
OPERATION
Labeling the Channels
Use this feature to assign an easy-to-remember label to any channel (i.e., “CBS”, “ESPN”,
“PBS2”, CNN1”, etc.) A label consists of five fields, where each field is a letter, a number or a
blank. When the INFO button is pressed, the channel label will appear next to the channel
number.
1
Press the CH or CH button to tune to the channel that will be
labeled.
2
Press the MENU button.
Press the … or † button to
select “Channel”, then press
the ENTER button.
3
Press the … or † button to
select “Name”, then press the
ENTER button.
Antenna : Air √
Auto Program √
Add/Delete √
Favorite Channels √
Name √
Fine Tune √
Signal Strength √
T V Channel
Antenna : Air √
Auto Program √
Add/Delete √
Favorite Channels √
Name √
Fine Tune √
Signal Strength √
T V Channel
4
Press the ENTER button again.
(Each label has five fields).
Press the … or † button to
select a letter, a number or a
blank. (Results in this sequence:
A,B …Z,blank,/,0,1,… 9).
5
Press the √ button to switch to
the next field,which will be
selected. Select a second
letter or digit pressing … or †
button, as above. Repeat the
process to select the last three
digits.
Press the EXIT button to exit.
T V Name
▲
▼
OK
Clear
Clear
Clear
Clear
Clear
TV 1 P
_
TV 2
TV 9
CATV 21
CATV120
T V Name
▲
▼
OK
Clear
Clear
Clear
Clear
Clear
TV 1 PBS12
TV 2
TV 9
CATV 21
CATV120
Notes
• Only analog TV channels can be labelled.
• If you add or delete the TV channel, the labelled channels list will
also be added or deleted.
Analog
AA68-03263B-00_eng_Chapter3 4/21/04 5:30 PM Page 34