Filter
Top Products
English-30
Selecting the Antenna
Adding and Erasing Channels
Channel Control
1.
Press the
MENU
button to display the menu.
Press the
or
button to select “Channel”, then press the
ENTER
button.
2.
Press the
ENTER
button to select “Antenna”.
Press the
or
button to select “Air” or “Cable”, then press the
ENTER
button.
Press the
EXIT
button to exit.
Press the
ANTENNA
button on the remote control to select Air or Cable.
➢
If the antenna is connected to ANT 1 IN (AIR), select
“Air” and if it is connected to ANT 2 IN (CABLE), select
“Cable”.
➢
If both ANT 1 IN (AIR) and ANT 2 IN (CABLE) are
connected, select the antenna input you want. If the
antenna input is not selected properly, noise may
appear on the screen.
1.
Press the
MENU
button to display the menu.
Press the
or
button to select “Channel”, then press the
ENTER
button.
2.
Press the
or
button to select “Channel Manager”, then press the
ENTER
button.
3.
Press the
ENTER
button to select “All”.
4.
Press the
or
button to select a channel to delete, then press the
ENTER
button.
Press the
or
button to select “Delete”, then press the
ENTER
button
to delete the channel.
You can add or delete a channel to display the channels you want only.
To use the Channel Manager function, first run Auto Program (see page 17).
Channel
Antenna : Air
ˆ
Auto Program
ˆ
Channel Manager
ˆ
Name
ˆ
Fine Tune
ˆ
Signal Strength
ˆ
Move Enter Return
Channel Manager /All
List Mode Delete All
Air 8
1/2
DTV Air 2-1
Air 4
Air 6
DTV Air 7-1
Air 8
Air 9
Air 10
DTV Air 10-1
DTV Air 10-2
DTV Air 10-3
DTV Air 11-1
DTV Air 11-2
DTV Air 11-3
DTV Air 12-1
DTV Air 12-2
DTV Air 12-3
Air 13
DTV Air 13-1
DTV Air 13-2
DTV Air 13-3
DTV Air 13-4
Air 17
DTV Air 12-2
Air 28
MovePage Enter Return
Channel Manager
All
ˆ
Added
ˆ
Favorite
ˆ
Default List Mode : All
ˆ
Move Enter Return
▼
Channel
Antenna : Air
Auto Program
Channel Manager
Name
Fine Tune
Signal Strength
Air
Cable
Move Enter Return
or
Continued...