Filter
Top Products
47
English
04 Advanced Features
Account Login
For a widget with multiple account, use ◄ and ► to access
the different account.
✎
For a more enjoyable widget experience, register and
log in to your account.
✎
For instructions on creating an account, refer to
Settings → Internet@TV ID → Create.
1. Press the Red button in Internet@TV home page.
2. Select desired User account, then press the ENTER
E
button.
✎
If you want create account, press Red button;
then create account OSD window appear.
3. Enter the Password.
✎
When login succeeds, User account will be
displayed on the screen.
¦ Setting up Internet@TV
Settings
Create IDs and configure Internet@TV settings from this
screen. Highlight Settings using ▲ and ▼ buttons and press
the ENTER
E
button.
■ System Setup
Ticker Autorun (Off / On): Enable/disable ticker autorun
upon powering on the TV.
✎
The Ticker application provides useful News,
Weather, and Stock Market information. The
Ticker application on Internet@TV must be
downloaded to use this feature.
✎
Depending on your country, the Ticker application
may have different service or not be supported.
Channel Bound Service (Off / On): Some channels
support widgets as an Internet data service, allowing you
to access the Internet service while watching TV.
✎
Only available if supported by the broadcaster.
Change the Service Lock password
✎
The default password set is “0-0-0-0.”
✎
If you forget the password, press the following
sequence of remote control buttons to reset the
password to “0-0-0-0”: POWER (off) → MUTE →
8 → 2 → 4 → POWER (on).
Reset: Resets Internet@TV settings to factory default
settings.
■ Internet@TV ID
You can use this menu when creating, deleting the
account. You can control your account including
contents site’s account information.
✎
Account is only for internet@TV.
Create: Create an account and link it with desired
service widgets.
✎
NOTE
x
Account will be made less than 10.
x
Maximum number of characters is 8.
Manager
– Service Site: Register login information for service
sites.
– Change Password: Change account password.
– Delete: Delete the account.
■ Service Manager: Delete and lock widgets installed to
Internet@TV.
Lock: Lock the widget.
✎
Accessing a locked widget requires the password.
Delete: Delete the widget.
■ Properties: Display information about Internet@TV. Use
the Check the speed of your internet connection
option to test your network connection.
R
Return
Settings
▪ System setup
▪ Internet@TV ID
▪ Service Manager
▪ Properties
▪ Ticker Autorun : Off
▪ Channel Bound Service : Off
▪ Change the Service Lock password
▪ Reset
admin
Login
User account :
Password :
Create [0~9] Enter PIN
R
Cancel
[UC7000_Aus]BN68-02831A-01Eng.indb 47 2010-03-16 오후 2:04:04