Filter
Top Products
108
5
If the router has security, enter the Security key (Security key or PIN).
6
When done, use the right arrow button to move the cursor to Next, and then press . The
network connection screen appears and the verification process starts.
7
Select Stop while network connections are being attempted. This will stop the connection.
8
Select IP Settings on network connection screen. The IP Settings screen appears.
9
Select the field at the top, press , and then set IP Settings to Enter manually. Repeat the
entry process for each field in the 1 min..
―
Setting IP Settings to Enter manually automatically changes DNS Setting to Enter manually.
10
When done, select OK at the bottom of the page, and then press . The network test screen
appears and the verification process starts.
11
When the connection has been verified, the “Your wireless network and Internet connection
are setup and ready to use.” message appears.
WPS(PBC)
How to set up using WPS(PBC)
If your router has a WPS(PBC) button, follow these steps.
1
Go to Network Settings screen.
2
Select WPS(PBC), press , and then press again.
3
Press the WPS(PBC) button on your router within 2 minutes. Your product automatically acquires
all the network setting values it needs and connects to your network.
4
The network connection screen appears, and network setup is done.