Filter
Top Products
When you turn on your TV for the first time, it immediately starts the Initial Setup.
During Initial Setup, your TV connects to your home network, implements Smart Hub
agreements, links to the source of your live TV signal, and sets up control of your set-
top or satellite box.
Information You Need
Have the following information on hand
before you turn on your TV for the first
time:
t Your wireless network’s password.
(Make sure your network is on.)
t Your Postal or Zip code.
t The name and location of your cable
or satellite provider (if you use one).
Internet Access
The TV must be connected to the Internet
to use the Smart Features. If you have
a wireless network, confirm that your
network router is working before you
start the initial setup. If you have a wired
network, connect the TV to the network
with an Ethernet cable before you begin
(CAT 7 cable preferred).
Running Initial Setup
1 Plug your TV into a wall outlet.
2 Aim the Remote Control at the TV.
3 Press the TV button on the Remote
Control to turn on the TV, and then
follow the directions on the screen.
To learn more about operating your TV and its Smart Features, see your TV’s user‘s
manual or launch the TV’s built in e-Manual. Congratulations on the purchase of your
new Smart TV!
6
Initial Setup