Regulatory Compliance Statements
- Federal Communications Commission (FCC) -
USA
-
Industry
Canada Equipment Standard for
Digital
Equipment
(ICES-003)
- Canada
- Voluntary
Control Council for
Interference (VCCI) - Japan
- Bureau
of
Standards Metrology and
Inspection (BSMI)- Taiwan
- Korea Communications Commission(KCC) - Republic
of
Korea
-
Italian
Post Ministry (Homologation) -
Italy
FCC
Class
A Notice
This device complies with part 15
of
the FCC
Rules. Operation
is
subject to the following two conditions:
1.
This device may not cause
harmful
interference, and
2.
This device must accept any interference received,
including
interference that may cause undesired operation.
rEI
This equipment has been tested and found to
comply
with the
limits
for a
Class
A
digital
device, pursuant
to
Part
15
of the FCC
Rules.
These limits
are designed to provide
reasonable
protection against harmful
interference when the equipment
is
operated
in
a
commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used
in
accordance with
the instruction
manual,
may cause
harmful
interference to radio communications. Operation
of
this equipment
in
a residential area
is
likely
to cause
harmful
interference
in
which case the user
will
be required to correct the interference at his own expense.
FCC
Class 8 Notice
This device complies with part
15
of
the
FCC
Rules. Operation
is
subject to the following two conditions:
1.
This device may not cause
harmful
interference, and
2.
This device must accept any interference received,
including
interference that may cause undesired operation.
rEI
This equipment has been tested and found
to
comply
with the
limits for a
Class
B
digital
device, pursuant
to
Part
15
of
the FCC
Rules.
These
limits
are designed
to
provide
reasonable protection against
harmful
interference
in
a residential
installation.
This
equipment generates, uses and can radiate radio frequency energy and, if not
installed
and used
in
accordance with the instructions,
may cause
harmful
interference
to
radio communications. However, there
is
no guarantee that interference will
not
occur
in
a
particular
installation.
If
this equipment
does
cause harmful
interference
to
radio
or
television
reception, which can be determined by
turning the equipment off and on, the user is encouraged
to
try
to
correct the interference by one
or
more
of
the
following
measures:
- Reorient
or
relocate the receiving antenna.
-
Increase
the separation between the equipment and receiver.
- Connect the equipment into an
outlet
on a circuit different from that
to
which the receiver
is
connected.
-
Consult
the
dealer
or
an experienced radio!TV technician for help.
User Information
Changes or modifications not
expressly
approved by the party responsible for
compliance could
void the user's authority to operate the
equipment.
If
necessary, consult
with your dealer
or
an
experienced radio/television technician for additiona suggestions.
You
may find the
booklet called
How to
Identify
and
Resolve
Radio!TV
Interference Problems helpful.
This
booklet
was prepared by the
Federal
Communications
Commission.
It
is
available from the
U.S.
Government Printing Office. Washington,
DC
20402, Stock
Number
004-000-00345-4.
The party
responsible
for product compliance:
SAMSUNG ELECTRONICS CO.,
LTD.
America QA Lab of Samsung
3351
Michelson Drive
Suite #290, Irvine,
CA92612
USA
~~~~~~~---------------------------------------------------------------------------------
User must use
shielded signal
interface cables
to
maintain FCC compliance
for the product. Provided with this monitor
is
a
detachable
power
supply
cord with
IEC320 style
terminations. It may be
suitable
for connection
to
any UL Listed
personal
computer
with
similar
configuration.
Before making the connection, make sure the
voltage
rating
of
the
computer
convenience outlet
is
the same as the monitor
and that the ampere rating
of
the
computer
convenience outlet
is
equal
or exceeds the monitor
voltage
rating. For
120
Volt
applications,
use only
UL
Listed
detachable
power
cord with NEMA configuration
5-15P type(parallel blades) plug cap. For
240
Volt
applications use
only
UL Listed
detachable
power
supply
cord with NEMA configuration
6-15P
type (tandem
blades) plug cap. This
television
receiver
provides
display
of
television closed
captioning
in
accordance with Section
15.119
of
the FCC
rules.
(TV
broadcast receivers with picture
screens
13
inches
or
larger
in
diameter
models only)