Regulatory Compliance Statements
- Federal Communications Commission
(FCC)
- USA
- Industry Canada Equipment Standard for Digital Equipment (ICES-003) - Canada
- Voluntary Control Council for Interference
(VCCI)
- Japan
- Bureau
of
Standards Metrology and Inspection (BSMI) - Taiwan
- Korea Communications Commission(KCC) - Republic
of
Korea
- Italian Post Ministry (Homologation) - Italy
FCC Class A Notice
This device complies with
part
15
of
the FCC Rules. Operation is subject to the following two conditions:
1 . This device
may
not cause harmful interference, and
2. This device
must
accept any interference received, including interference that may cause undesired operation.
[E)
This equipment has been tested and found
to
comply with the limit!t for a Class A digital device, pursuant
to
Part 15
of
the FCC Rules.
These limits are designed
to
provide reasonable protection against harmful interference when the equipment
is
operated in a
co
mmercial
environment. This equipment generates, uses, and can radiate radio frequency ener
gy
and, if not installed and used in accordance with
the instruction manual, may cause harmful interference
to
radio communications. Operation
of
this equipment
in
a residential area
is
likely
to
ca
use harmful interference
in
which case the user wi
ll
be required
to
cor
rect the interference at his own expense.
FCC Class 8 Notice
This device complies with
part
15
of
the FCC Rules. Operation is subject to the following two conditions:
1. This device
may
not
cause harmful interference, and
2. This device
must
accept any interference received, including interference
th
at may cause undesired operation.
[E)
This equipment has been tested and found
to
comply with the limits for a Class B digital device, pursuant
to
Part i 5
of
the FCC
Rules. These limits are designed
to
provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if
not
installed and used in accordance with the instructions,
may cause harmful interference
to
radio communications. However, there is
no
guarantee that interference will not
occur
in a
particular installation.
If
this equipment does cause harmful interference
to
radio
or
television reception, which can
be
determined by
turning the equipment off and on,
th
e user
is
encouraged
to
try
to
correct the interference
by
one
or more
of
the following measures:
- Reorient
or
relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet
on
a circuit different from
that
to
which
the
receiver is connected.
- Consult the dealer
or
an experienced radio/TV technician
for
help.
User Information
Changes or modifications not express
ly
approved by the party responsible for compliance could void the user's authority
to
operate the
equipment. If nec
essary,
consult with your dealer or
an
experienced radio/television technic
ian
for additiona suggestions.
You
may find the
booklet called How
to
Identify and Resolve Radio/TV Interference Problems helpful. This booklet was prepared by the Federal Communications
Commission.
It
is
available from the
U.S
. Government Printing Office. Washington, DC 20402, Stock Number 004-000-00345-4.
The party responsible for product compliance:
SAMSUNG ELECTRONICS CO.,
LTD.
America
OA
Lab of Samsung
3351 Michelson Drive
Suite #290,
Irvin
e,
CA92612 USA
Warning
User must use shielded signal interface
cab
l
es
to
ma
intain FCC
comp
li
ance for
th
e product. Provided with this monitor is a detachable
power supply cord with
IE
C320 style terminations. It may
be
suitable for connection to any
UL
Listed personal
comp
uter with similar
co
nfiguration.
Be
fore making
th
e
co
nnection, make s
ur
e
th
e voltage rating
of
the
com
put
er convenience
ou
tlet is the same as the monitor
and that the ampere rating
of
the
computer
convenience
out
let is equal or exceeds the monitor voltage rating. For 1
20
Volt
app
li
ca
tions,
use only
UL
Li
sted
deta
chable
power
co
rd with NEMA
co
nfiguration 5-15P type(para
ll
el blades) plug cap. For
240
Volt applicati
ons
use
only
UL
Li
sted detachable power supply cord with NEMA configuration 6-15P
type
(tandem blades) plug
ca
p. This television receiver
provides display
of
television closed captioning
in
accordan
ce
with Section 15. i
19
of the FCC rules.
(TV
broadcast receivers with picture
screens
i 3 inches or larger
in
diameter
mod
els onl
y)