Filter
Top Products
19
GB
Inserting Batteries in the Remote Control
Setting the Date and Time
You must insert or replace the batteries in the remote control when
you:
◆ Purchase the DVD-VCR
◆ Find that the remote control is no longer working
correctly
1 Push the tab in the direction of the arrow to release the battery
compartment cover on the rear of the remote control.
2 Insert two AAA, RO3 or equivalent batteries, taking care to respect
the polarities:
◆ + on the battery with + on the remote control
◆ – on the battery with – on the remote control
3 Replace the cover by aligning it with the base of the remote
control and pushing it back into place.
➢ Do not mix different battery types (manganese and
alkaline for example).
Your DVD-VCR contains a 24-hour clock and calendar used to:
◆ Automatically stop programme recording
◆ Preset your DVD-VCR to record a programme
automatically
You must set the date and time when:
◆ You purchase the DVD-VCR
☛
◆ Do not forget to reset the time when you change
clocks from winter to summer time and vice versa.
1 After pressing the MENU, press the OK or
.
Result
: The Setup menu is displayed.
2 Press the corresponding
,
buttons to select the Clock
option.
3 Press the OK or
to select this option.
Result
: The Clock Set menu is displayed.
4 Press
¥
or
to select the hour, minutes, day, month and year.
Result
: The option selected highlight.
5 Press the
or
buttons to increase or decrease the value.
Result
: The day of the week is displayed automatically.
➢ You can hold the
or
buttons down to scroll more
quickly through the values.
6 On completion, press RETURN to exit the menu.
Time Date Year
Clock Set
12 : 00 1 / JAN / 2003 WED
1
00169N DVD-V70/XSA-GB1 11/14/05 9:51 AM Page 19