Filter
Top Products
36
GB
Modifying G-CODE Programming
If you wish to correct the programme displayed or modify certain elements, such as the recording
speed, you can do so before you press M
ENU a second time to confirm.
If you wish to... Then...
Select an input source other ◆ Press the
¥
or
buttons, until the PR selection flashes.
than the tuner (LINE IN 1 or LINE IN 2)
◆ Press the INPUT SEL. button one or more times to change the
input source selection.
Result
: The programme number is replaced by:
• The LINE IN 1 or LINE IN 2 source using the
INPUT SEL. button for a satellite tuner or
external video source
➢ The input source must be selected before changing any
other value.
Record a programme every day ◆ Press the
¥
or
buttons, until the DAY selection flashes.
(Monday to Sunday) at the same time
◆ Press the
or
buttons, until the DLY (Daily) value is
displayed.
Record a programme every week ◆ Press the
¥
or
buttons, until the DAY selection flashes.
on the same day and at the same time
◆ Press the
or
buttons, until the W- (Week) value is
displayed, followed by the required day.
Example
: W-SA (Weekly Saturday)
Extend the recording time ◆ Press the
¥
or
buttons, until the STOP selection flashes.
◆ Press the
or
buttons to increase or decrease the stop
time.
Select the recording speed ◆ Press the
¥
or
buttons, until the recording speed selection
flashes.
◆ Press the
or
buttons until the correct indication is
displayed:
• AUTO (Auto Tape Speed Select) : see page 37
• SP (Standard Play)
• LP (Long Play)
VCR
00169N DVD-V70/XSA-GB2 11/14/05 10:11 AM Page 36