Sansui HDLCD1900 Flat Panel Television User Manual


 
5
IMPORTANT SAFETY INSTRUCTIONS
CONDENSATION
Moisture will form in the operating section of the player if the player is brought from cool surroundings into a warm room or if
the temperature of the room rises suddenly. When this happens, player's performance will be impaired. To prevent this, let the
player stand in its new surroundings for about an hour before switching it on, or make sure that the room temperature rises
gradually.
Condensation may also form during the summer if the player is exposed to the breeze from an air conditioner. In such cases,
change the location of the player.
HOW TO HANDLE THE LCD PANEL
Do not press hard or jolt the LCD panel. It may cause the LCD panel glass to break and injury may occur.
If the LCD panel is broken, make absolutely sure that you do not touch the liquid in the panel. This may cause skin
inflammation.
If the liquid gets in your mouth, immediately gargle and consult with your doctor. Also, if the liquid gets in your eyes or
touches your skin, consult with your doctor after rinsing for at least 15 minutes or longer in clean water.
Possible Adverse Effects on LCD Panel: If a fixed (non-moving) pattern remains on the LCD Panel for long periods of time,
the image can become permanently engrained in the LCD Panel and cause subtle but permanent ghost images. This type of
damage is NOT COVERED BY YOUR WARRANTY. Never leave your LCD Panel on for long periods of time while it is
displaying the following formats or images:
Fixed Images, such as stock tickers, video game patterns, TV station logos, and websites.
Special Formats that do not use the entire screen. For example, viewing letterbox style (16:9) media on a normal (4:3)
display (black bars at top and bottom of screen); or viewing normal style (4:3) media on a widescreen (16:9) display (black
bars on left and right sides of screen).
The following symptoms are not signs of malfunction but technical limitation. Therefore we disclaim any responsibility
for these symptoms.
LCD Panels are manufactured using an extremely high level of precision technology, however sometimes parts of the
screen may be missing picture elements or have luminous spots.
This is not a sign of a malfunction.
Do not install the LCD Panel near electronic equipment that is susceptible to electromagnetic waves. Some equipment
placed too near this unit may cause interference.
Effect on infrared devices – There may be interference while using infrared devices such as infrared cordless headphones.
SAFETY PRECAUTIONS
The unit emits heat when in operation. Do not place any covers or blankets on the unit, this may cause overheating.
Do not block ventilation holes, or set up near radiators. Do not place in direct sunshine. When placing on a shelf leave 10 cm
(4 inches) free space around the entire unit.
Notes when mounting the LCD TV on a wall
When installing the unit on a wall, allow at least 6 cm (2 1/2 inches) clearance between the rear of the LCD TV and the wall.
Clearance of less than 6 cm (2 1/2 inches) will obstruct the vents and may cause the interior of the unit to overheat,
resulting in damage to the unit.
If the unit is to be mounted on the wall, contact the retailer where you purchased the LCD TV for advice, and have the
equipment professionally installed. Incomplete or improper installation may cause injury to you, and/or damage to the LCD
TV.
•Bracket holes: To attach a wall mounting bracket (not supplied) remove the screws and attached where indicated in the
drawing below.
10cm
Bracket holes
33F0201A_En_p02-05 7/5/07, 3:29 PM5