19
1
Press MENU. The menu screen will appear.
2
Press or to select
(SETUP) menu, then press ▲
or ▼ to select “AUTO CH
MEMORY”.
3
Press or . The TV will begin
memorizing all the channels
available in your area.
• It may take from 15 minutes to
30 minutes to complete
memorizing digital cable
channels.
Depending on the reception condition, a BAR display may
not advance for several minutes, please be patient.
Automatic memory tuning
To ADD/DELETE channels
Memorizing channels
1
Press MENU. The menu screen will appear.
2
Press or to select
(SETUP) menu, then press ▲
or ▼ to select “ADD/DELETE”.
Press
or .
The ADD/ DELETE menu will
appear.
3
Press ▲ or ▼ to select “ADD/
DELETE”, then press
or .
4
Select the desired channel
to be memorized or deleted
using ▲ or ▼.
Press
or to select “ADD”
or “DELETE”, whichever
function you want to perform.
5
Repeat step 4 for other channels you want to add or delete,
then press ENTER.
6
Press EXIT to return to the normal screen.
NOTES:
• Memorizing channels is best
accomplished during evening
“PRIMETIME” hours, as more
stations are broadcasting digital
signals. Memorizing channels can
only be accomplished while a
station is broadcasting a digital
signal to set that channel into
memory.
• If you are unsure of the digital
channels available in your area you
may visit
www.antennaweb.org
to receive a list based on your
address or zip code. Should you
require further assistance you may
call our toll-free customer service
line at 1-800-289-0980.
•New digital channels may be added
to your area periodically, it is
recommended to perform the
“AUTO CH MEMORY” procedure
regularly.
•To return from ADD/DELETE menu
to SETUP menu, select “RETURN”,
then press
or .
To add a digital channel
Select the channel you wish to add.
Press ▲ or ▼ to select “ADDING CHANNEL” as in step 3 above,
then press
or .
CABLE
AUTO CH MEMORY
PROGRAMMING NOW
PLEASE WAIT
EXIT : CANCEL
:SELECT
:ADJUST
ADD/DELETE
ADDING CHANNEL
ADD/DELETE
CH SIGNAL
1 ANALOG DELETE
2 ANALOG ADD
3 ANALOG DELETE
4 ANALOG DELETE
5 ANALOG ADD
5-001 DIGITAL ADD
CLEAR ALL
RETURN
SETUP
LANGUAGE ENGLISH
TV/CABLE CABLE
AUTO CH MEMORY
ADD/DELETE
:SELECT
:ADJUST
SETUP
LANGUAGE ENGLISH
TV/CABLE CABLE
AUTO CH MEMORY
ADD/DELETE
:SELECT
:ADJUST
:SELECT
:ADJUST
ADD/DELETE
ADDING CHANNEL
ADD/DELETE
CH SIGNAL
1 ANALOG ADD/DELETE
2 ANALOG ADD
3 ANALOG DELETE
4 ANALOG DELETE
5 ANALOG ADD
5-001 DIGITAL ADD
CLEAR ALL
RETURN
CLEAR ALL
All channels are deleted from the channel memory.
Press ▲ or ▼ to select “CLEAR ALL” as in step 3 above, then
press
.
32D0101A_En_p18-23 24/1/07, 9:06 AM19