Filter
Top Products
27
NOTES:
• If the program or video you selected is not closed-captioned, no captions will display on-screen.
• If text is not available in your viewing area, a black rectangle may appear on-screen. If this happens, set the
Closed Caption feature to “OFF”.
• When selecting Closed Captions, the captioning will be delayed approx. 10 seconds.
• If no caption signal is received, no captions will appear, but the television will remain in the Caption Mode.
• Misspellings or unusual characters may occasionally appear during Closed Captioning. This is normal with
Closed Captioning, especially with live programs. This is because during live programs, captions are also
entered live. These transmissions do not allow time for editing.
• When Captions are being displayed, on-screen displays, such as volume and mute may be seen but may
interfere with Closed Captions.
• Some cable systems and copy protection systems may interfere with the Closed Captioned signal.
• If using an indoor antenna or if TV reception is very poor, the Closed Caption Decoder may not appear or may
appear with strange characters or misspelled words. In this case, adjust the antenna for better reception or use
an outdoor antenna.
Closed Caption
WHAT IS CLOSED CAPTIONING?
This television has the capability to decode and display Closed Captioned television programs. Closed Captioning
will display text on the screen for hearing impaired viewers or it will translate and display text in another language.
1
Tune the TV to the desired program.
2
Press MENU, then press or to display the (SETUP)
menu.
3
Press ▲ or ▼ to select “ANALOG CAPTION” or DIGITAL
CAPTION”.
4
Press or to select the desired Closed Caption mode.
NOTE:
To turn the Closed Caption feature off, select “OFF”.
Captions: This Closed Caption Mode will display text on the
screen in English or another language. Generally, Closed Captions
in English are transmitted on C1 and Closed Captions in other
languages are transmitted on C2.
Text: The Text Closed Caption Mode will usually fill 1/2 of the screen
with a programming schedule or other information.
5
Press EXIT to return to the normal screen.
When an Analog signal is
received, you can choose C1,
C2, T1, T2 and OFF.
When a Digital signal is
received, you can choose
from CS1, CS2, CS3, CS4,
CS5, CS6 and OFF.
NOTE:
Depending on the broad-
cast signal, some Analog Captions will function with a Digital
broadcast signal.
SETUP
ANALOG CAPTION OFF
C1/C2/T1/T2/OFF
DIGITAL CAPTION OFF
CC ADVANCED
:SELECT
:ADJUST
SETUP
ANALOG CAPTION OFF
DIGITAL CAPTION OFF
CC ADVANCED
CS1/CS2/CS3/CS4/CS5/CS6/OFF
:SELECT
:ADJUST
NOTE:
You can also display the ANALOG CAPTION menu by pressing
the CLOSED CAPTION button on the remote control.
32D0101A_En_p24-27 1/17/07, 2:13 PM27