23
ENGLISH
Time Shift
You can record a digital program by using the
USB memory drive. This function is for your
convenience, and allows you to pause/record a
live program for a period of time based on the
size of the USB drive inserted.
Note: The connected USB device must;
Have a minimum approx. 100 MB of memory (32 GB
max.).
Formatted as FAT16/32.
Have a write speed higher than 40Mb/sec.
Contain no other files.
Do not use USB extension cable.
Preparation:
Plug-in an external storage device into USB port.
To start recording, press
(PAUSE). The recording
will start and the picture will be paused.
To view a live program press (STOP). The paused
picture goes back to a live program and recording
continues.
To stop recording, press (STOP). The recording is
stopped and the paused picture goes back to a live
program.(Press (STOP) twice while recording the
program.)
To start playback, press (PLAY). The recorded
program starts playback.
If you want to watch the program while recording,
press (PLAY).
You can watch the recorded program while
recording the current program.
To pause the playback picture, press (PAUSE).
To stop the playback, press (STOP).
To fast forward or fast reverse, press (SKIP–) or
(SKIP+).
USB status display
Press DISPLAY while watching a DTV channel, or
press the Time Shift operation buttons. The status
display will appear.
USB Memory Information
●
▶
Delay Time : 00:02:09
Message: Now Play View
•
•
•
•
•
•
•
•
•
•
•
•
To delete the recorded program
Disconnect the USB memory, record another
program, or turn off the TV.
Note:
Time shift does not work for ATV or external inputs. If you
change the signal during recording a program (Live View).
Recording will stop.
During Play view mode, ATV channel select or input select
will not work.
Time shift recordable time is approximately 10 minutes
per 1 GB for HD or 30 minutes for SD (depending on the
programs).
You cannot watch the recorded program on PC or other
devices.
Cannot be guaranteed all of the USB memory.
We will accept no responsibility whatsoever for loss of files
on USB devices caused by connection to this unit.
•
•
•
•
•
•
Playback status :
(PLAY),
(STOP),
(PAUSE),
(SKIP+),
(SKIP-)
Recording
Delayed time from the current program
or Playing time in the play mode.
If there are no recorded program in
the USB memory, --:--:-- will appear
•
Message display
Now Live View... Viewing live program
Now Play View... Viewing recorded program
Now Pause View... The program is paused
Not Available... Inhibited function
USB Memory is full...Caution of available USB memory
less than 100MB (Insufficient USB free space...will show
when
(PAUSE) is pressed.
No Data... When you press (PLAY) and there are no
data recorded in the USB memory
USB Memory is unplugged... USB Memory is not connected
•
•
•
•
•
•
•
3FR5521A_EnSp.indb 233FR5521A_EnSp.indb 23 9/17/11 5:52:23 PM9/17/11 5:52:23 PM