Filter
Top Products
Memorizing the Channels
15
Selecting the Tuning Band
This unit can automatically find all channels available through antenna or cable inputs, and store them in memory.
Before your TV can memorize the available channels, you must specify the type of signal source that is connected
to the unit. (i.e., an antenna or cable system)
Auto Channel Search
Press MENU to display the menu main page.
1
Press repeatedly to select menu.5or 6 Setup
2
Press OK or to access the submenu.4
3
Press OK or to select the Tuning Band.4
Air, Cable, Cable HRC, Cable IRC and Cable Auto can be selected.
If using antenna, select Air;
If using cable, select one of Cable/Cable HRC/Cable IRC/Cable Auto according to your local area’s cable
system Normally please select Cable Auto. (For further band information contact your cable service
provider.)
4
Press to select .5or 6 Tuning Band item
5
Navigate to the Setup sub-menu and highlight Auto Ch Search.
1
2
Press OK or to begin the auto channel search.
The unit will automatically search for all available TV/DTV (if
using antenna), CATV/CADTV (if using cable) program.
Note: if you want to stop the auto-search, press EXIT button.
Digital (CADTV) cable systems may cause several
unviewable channels to be memorized.
4
Video
Tuning Band
DTV Signal
Air
To Move
To Select
To Exit
Audio
Setup
Feature
OK Exit
Add On Channel Search
Navigate to the Setup sub-menu and highlight Add On Ch
1
2
Press OK or to begin the a channel search.
The unit will automatically search for new programs and add them
to the program list.
4 dd on
Note: If you want to stop the search, press EXIT button.
Auto Ch Search
Manual Ch Set
Channel Labels
Add On Ch Search
Video
Tuning Band
DTV Signal
Auto Ch Search
Manual Ch Set
Channel Labels
Air
To Move
To Select
To Exit
Audio
Setup
Feature
OK Exit
Autoprogram Menu
Channel 12
Channels Found
Progress (%)
Found
3
7
Add On Ch Search
Auto On Ch Search
Video
Tuning Band
DTV Signal
Auto Ch Search
Manual Ch Set
Channel Labels
Air
To Move
To Select
To Exit
Audio
Setup
Feature
OK Exit
Add On Ch Search
Manual Channel Set
Navigate to the Setup sub-menu and highlight Manual Ch Set.
1
2
Press OK or to open Manual Channel Set Menu sub-menu.4
After setting channels into memory, you can add or delete channels
from the default channel list as follows:
3
Use to 5 or 6 button select a channel, then press the OK button
to add or delete the channel.
4
Press EXIT button to exit.
Now when you use CH+/- buttons to cycle among the channels,
the deleted channels can not be selected.
Video
Tuning Band
DTV Signal
Auto Ch Search
Manual Ch Set
Channel Labels
Air
To Move
To Select
To Exit
Audio
Setup
Feature
OK Exit
Add On Ch Search
After initial auto channel search, you can make use of Add On
Channel Search option to search for new programs and add them to