Sanyo AVM-3651G CRT Television User Manual


 
13
USING THE AUDIO/ VIDEO INPUT JACKS
CONNECTING A VCR OR OTHER EXTERNAL EQUIPMENT
Switch off TV and external equipment before connecting cables. (Cables are not supplied.)
1. Connect VCR, DVD, DSS, or other equipment’s Audio Out (R/L) to the TV Audio
Input (R/L)
.
For Mono VCR (Single Audio Jack) connect VCR Audio Out to TV Audio (L) Input.
2. Connect VCR, DVD, or other equipment’s Video Out to the TV Video Input
.
Optional
Connect VCR, DVD, or other equipment’s S-Video Out to the TV S-Video In (AV1)
Jack or S-Video In (AV2) Jack
.
Using the S-Video In (AV1) jack overrides the Video 1 jack
, and using the S-Video In
(AV2) jack overrides the Video 2 Input jack
.
3. Press POWER
to turn on the TV. Turn on external equipment also.
4. Press the INPUT key
to select program source: TV signal or signal from the
equipment you have connected to the A/V1 and A/V2 jacks.
Follow the same procedure to connect other compatible video equipment to the second set
of A/V jacks.
QuickTips
Make sure all cable
connectors are fully
seated on jacks.
Always match cables
according to the
colors;
RED for right
audio,
WHITE for left
audio and
YELLOW for
video.
A/V1 and A/V2 jacks
have identical func-
tions. Any compatible
video equipment can
be connected to either
set of jacks.
A solid Blue screen
with the word Video1
or Video2 displayed
means that the Video
mode is selected, but
no signal is being
detected at the
Video jack. Check
connection, and
turn on external
equipment.
You may be able
to use the remote
control to operate
your VCR, DVD,
Cable Box, and TV.
(See pages 7~8.)
AUDIO VIDEO INPUT
AUDIO VIDEO INPUT
VIDEO
VIDEO
AV2
AV2
AV1
AV1
S-VIDEO
S-VIDEO
INPUT
INPUT
AUDIO
AUDIO
OUTPUT
OUTPUT
(MON0)
LL
AUDIO
AUDIO
RR
L
R
AV2
AV2
AV1
AV1
UHF/VHF/CATV
75
(MON0)
CH3 CH4
IN
OUT
A/V JACKS
RF
CHANNEL
R- -L
AUDIO VIDEO
R- -LAUDIO
VIDEO
Back View
of a VCR
RESETINPUT
POWER
VCR TV AUX
Remote Control
TV A/V Input
Rear Jacks
DVD Player