Filter
Top Products
19
CONNECTING ANALOG CABLE, CABLE BOX, VCR, AND AN ANTENNA TO
THE DTV
VIDEO1 COMPOSITE (ANALOG) JACKS:
Connection Option 1
VCR
1
Connect Analog Cable Box “Antenna Out” to the
VCR “Antenna In.”
2
Connect the VCR AV out jacks to VIDEO1 Yellow,
White, and Red jacks.
33
OPTIONAL FOR A SUPER VHS VCR
Connect VCR to the DTV S-Video In Jack. Discon-
nect the VIDEO1 yellow connector
Note: S-Video jack connection overrides a Video jack connection
(VIDEO1).
4
Connect an Antenna to the DTV Analog/ Digital
ANT. terminal.
5
Tune VCR to channel 3 or 4 to match your Cable
Box.
6
Press INPUT to select Video 1 to watch Analog
Cable channels OR to TV channels to watch
Antenna channels.
7
Select Cable channels with the cable box remote
control. Select Antenna channels with the DTV
remote control.
S-VIDEO JACK
(Optional)
IMPORTANT FACTS:
Composite jacks offer
only 480i (SDTV)
resolution.
“No Signal” will appear randomly
on the screen when no signal is
detected at the video jack.
● Check Audio/ Video connections.
● Check external equipment
connections.
● Check external equipment
settings.
● Press the INPUT key.
● Switch on external equipment.
SYMPTOM CHECK THESE CONDITIONS TRY THESE SOLUTIONS
If you continue to experience problems, please call toll free
1-800-877-5032. We can Help!
CABLE BOX
DTV ANALOG/DIGITAL
ANTENNA IN
❷
❹
OPERATING TIP:
Refer to the owner’s manuals and user’s
guides that came with your external
equipment for connection options.
③
❶
CABLE SYSTEM
(Service provider)
HELP HINTS (PROBLEMS/SOLUTIONS)
DTV VIDEO1
REMOTE CONTROL
❻
INPUT
YELLOW,
WHITE, & RED
JACKS
VCR