Filter
Top Products
15
Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
ADJUST PICTURE MANUALLY
1
Choose Manual from the Picture menu options.
2
Press the + key to access the sub-menu options.
3
Use the ▲▼ keys to select the picture setting you want
to change.
4
Use the –+keys to adjust settings.
ADJUSTING SOUND
Select desired sound setting: Audio, Bass, Treble, or
Surround.
1
Choose Audio from the Sound menu options.
2
Use the ▲▼ keys to select the sound setting you want
to change. (Red ➡ arrow indicates selected highlighted
option.)
3
Use the –+keys to adjust settings: Stereo, Mono or
SAP.
Note: Stereo and SAP must be part of the broadcast signal.
The TV will automatically reset to stereo if unplugged
or a power failure occurs.
4
To adjust the other sound features: Bass, Treble, or
Surround, simply follow steps 2~3 above.
ADJUSTING THE CHANNEL TUNING
RESETTING THE ANTENNA MODE AND CHANNEL
SEARCH
Resetting the Antenna or CH. (Channel) Search is required
only if additional channels become available, such as moving
to another city or having a cable service installed.
1
Choose Antenna or CH. Search from the Channel menu
options. (Red ➡ arrow indicates selected menu option.)
2
Use the – + keys to change Antenna settings: Cable or
UHF/VHF. For CH. Search, press the + key. The TV will
automatically start searching for your channels. It will
take the TV a few minutes to complete the search.
➥➥
(Continued on page 16.)