5
Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
GETTING STARTED
POSITIONING THE LCD TV
Always use an appropriate table or stand when
positioning your TV. For best viewing, avoid
locating the TV where direct sunlight or indoor
lighting will fall on the screen. Do not position
the TV in a confined area.
DETACHING THE TV STAND
(Optional)
Tools Needed: Phillips screwdriver
Important Note: Place TV face down on a
padded or cushioned surface to protect the
screen and finish.
1
Remove four (4) screws from the metal
bracket.
CAUTION: Hold the stand firmly as you
remove the last screw.
2
Carefully remove the TV stand.
INSTALLING BATTERIES IN THE
REMOTE CONTROL
Use 2 “AAA” batteries
(Not supplied)
.
Be sure batteries are installed correctly.
Match the “+” and “–” signs on the batteries
with marks inside the remote control.
Notes:
– Do not mix old batteries with new ones or mix
different types of batteries together.
– Remove the batteries if the remote control will
not be used for a month or more. Weak batteries
may leak and cause damage. (Normal battery life
is roughly six months.)
IMPORTANT NOTE: Spent or discharged batteries must be recycled or
disposed properly in compliance with all applicable laws. For detailed
information, contact your local County Solid Waste Authority.
Allow adequate space for proper
ventilation (3 to 4 inches on the
sides, top, and back).