Filter
Top Products
4
Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
PROTECTING THE LCD DTV SCREEN
The screen is likely to be damaged if it is not main-
tained properly. Do not use hard objects such as hard
cloth or paper. Do not use excessive pressure when
cleaning the screen; excessive
pressure can cause permanent
discoloration or dark spots.
NEVER spray liquids on the
screen.
REMOVING THE DTV STAND
(Optional)
Tools Needed: Phillips screwdriver
Important Note: Place DTV face down on a padded
or cushioned surface to protect the screen and
finish.
1
Remove four (4) screws from the metal bracket.
CAUTION: Hold the stand firmly as you remove
the last screw.
2
Carefully remove the DTV stand.
WALL MOUNTING (Optional)
Use the threaded inserts on
the back of your DTV to secure
it using a wall mounting kit.
VESA standard interface:
DP26647: 100 x 100
DP32647: 200 x 200
Note: Wall Mounting kit is not
supplied.
Mounting screws measurements:
DP26647—M4 Diameter, Length—10mm (maximum).
DP32647—M6 Diameter, Length—12mm (maximum).
POSITIONING THE LCD DTV
Always use an appropriate table or stand when
positioning your DTV. Do not position the DTV in a
confined area. Allow adequate space for proper
ventilation.
NOTE: All dimensions are in inches.
DTV Back View
HANDLING PRECAUTIONS
• Handle by the cabinet only. Never touch the
screen when handling.
• Excessive pressure on the screen can cause
permanent discoloration or dark spots.
• Handling damage is not covered under
warranty.
Power Requirement: Source: AC 120V, 60Hz
AC Power Consumption (average): DP26647: 104 watts
DP32647: 155 watts
SPECIFICATIONS
CAUTION: FCC Regulations state that improper modifications or
unauthorized changes to this unit may void the user’s
authority to operate the unit.
Model DP26647
Model DP32647