Filter
Top Products
6
ENGLISH
Need help? www.sanyoctv.com 1-800-877-5032
Installing Stand
1. Place the LCD TV on a flat surface place
where maintained with soft materials (such as
a blanket) to protect the display screen.
2. Secure the stand-base to the LCD TV with 4
screws (M4x14) found in the accessory bag.
WARNING:
• To prevent injury, this apparatus must be securely
attached to the floor/wall in accordance with the
installation instructions.
• This LCD TV could fall over if it is pushed, pulled or
knocked down. It would be safer to use a screw to
secure the LCD TV to desktop.
Screw type:
(Not supplied with TV)
20
Wall Mounting
(Optional)
Please install on wall by using a wall-mount
bracket. (Not supplied with TV )
• VESA standard interface: 100 x 100mm
• Screw type: M4×16 (Not supplied with TV)
NOTE:
1. Wall mounting kit is not supplied.
2. Wall mounting kit shall be able to sustain at
least 3 times of set weight.
We suggest that you keep your LCD TV at least
2.36 inches (60 mm) away from the wall to
prevent cable interference and to make room
for a better heat dissipation.
60mm
wall
IMPORTANT: Wall mount kit must
comply with VESA standard 100
x 100. All four (4) screws must be
threaded to the wall mount and
HDTV's back cabinet.