Filter
Top Products
18
Digital Add-on Search
Use this feature to add new channels
to the Digital Antenna Channel data-
base. Also, use this feature to add
channels when broadcast towers are in
opposite directions from your location.
NOTE: Go to www.antennaweb.org and
type in your zip code to obtain
specific tower vector information.
Channel numbers will appear under
the progress bar only when a channel
is found.
1
Press the TUNER key to select
the Digital Tuner.
2
Press the MENU key to display
the Main menu.
3
Use the CURSOR ▲▼ keys to
highlight the
Channel
category.
Press ENTER.
4
Use the CURSOR ▲▼ keys to
highlight the
Digital Add-on
Search
option. Press ENTER.
5
Use the CURSOR ▼ key to
choose Yes. Press ENTER.
NOTE: Turn your Antenna and repeat
these steps for each direction in
which there are transmitting
towers.
CHANNEL SETUP OPTIONS (CONTINUED)
➠
Antenna Selection (Analog)
Use this feature to switch between
Analog Off-air channels and Analog
Cable channels.
NOTE:To ensure that all available chan-
nels are included in the channel
scanning loop, you should
perform a Channel Search after
switching between Off-air and
Cable channels.
1
Press the TUNER key to select
the Analog tuner.
2
Press the MENU key to display
the Main menu.
3
Use the CURSOR ▲▼ keys to
highlight the
Channel
category.
Press ENTER.
4
Use the CURSOR ▲▼ keys to
highlight the
Antenna Selection
option. Press ENTER.
5
Use the CURSOR ▲▼ keys to
choose CABLE or VHF/ UHF.
6
Press the EXIT key to return to
normal TV viewing.
➠