Sanyo DP42841 Flat Panel Television User Manual


 
8
Need help? www.sanyoctv.com 1-800-877-5032
REMOTE CONTROL OPERATION
Turns your HDTV On or Off.
Selects the video source to view. Holding
down the key displays the Input List.
Modifies the Energy Saver level (see page
10 for details.)
Selects the desired Audio mode.
Stereo, Mono, or SAP (when available.)
Displays the current switch on time (see
Clock Timer on page 10 for details.)
Cycles through the available Caption
modes (when available.)
Pressing it twice restores your HDTV to its
factory settings. All user customized set-
tings will be cleared.
Displays the “Off” Timer. While Off Timer
is on-screen, press the “0” key to Set the
amount of time (in 30 minute increments)
at which the HDTV will turn off.
Select channels directly.
For channels 100 and up, press and hold
the first number, then enter the remaining
two numbers.
Scan through the channels in the memory
database.
Increases or decreases the audio level.
Allows for the direct selection of digital
subchannels. For example: to select
channel 39.1 press the 3 and 9 keys,
followed by the dash
, and 1 keys.
Switch between current channel and last
selected channel or input.
Mute or restore the sound.
Displays the Channel Information banner.
Cycles through the available aspect
ratios. The different settings either
stretch, zoom, or fill the image on your
screen. Bars may appear on top and bot-
tom of your screen (or on left and right
sides) depending on the broadcasted sig-
nal or program. (See page 15)
Modifies the Dynamic Volume feature
settings (see page 13 for details.)
Displays on-screen Help menu.
Displays or hides the on-screen menu.
Move the on-screen cursor in the
desired direction.
Set or select the highlighted option on
the screen.
Exits the on-screen menu.