Filter
Top Products
15
Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
WHITE PATTERN (PANEL REPAIR)
Use this feature to repair the Plasma
screen.
If an afterimage occurs, use the White Pattern
feature immediately to repair the panel. The more
severe the afterimage, the longer the curing
process may take. It may be impossible to repair
all cases of afterimage burn.
The sooner you remove a still picture and activate
White Pattern, the more likely it is that the panel
can be repaired.
Notes: Afterimage (or image burn) is not covered
under warranty.
When the White Pattern is activated the
screen will instantly turn completely white.
The On time is automatically set for 30
minutes.
Pressing any key except
Volume
▲▼,
Mute
, and
Audio
will cancel the curing
process and return the DTV to normal
viewing.
ENERGY (POWER) SAVER
This power saving feature reduces the brightness
level. The power saving function options:
• OFF – the feature is off and the power con-
sumption is normal.
• LOW – power saving level is low and the bright-
ness level is lower than normal.
• HIGH – power saving level is high and the bright-
ness is set to the lowest level.
PICTURE ROTATION (SCREEN SAVER)
Displaying a still picture for a long time may cause
an “afterimage” or “ghost” on the screen. To neu-
tralize this situation, use the Picture Rotation
function.
Note: When the Picture Rotation is set to ON, the
DTV automatically changes the display position
every 15 minutes to avoid afterimage.
OPERATING TIP:
■The Energy saver settings level will vary depend-
ing on the Picture/Sound mode. For instance, the
energy low level settings may be different
between the manual picture/sound mode (cus-
tomized settings) than the auto mode (factory
settings).