Sanyo DS27425, DS32225 CRT Television User Manual


 
CONNECTING A DVD PLAYER
Switch off TV and external equipment before connecting
cables. (Cables are not supplied.)
Connect a DVD Player or other equipment’s interlaced
Component Video Out to the TV Component Video In
(Y-Pb-Pr) Jacks.
Connect the DVD Player’s Audio Out to the TV A/V2
Audio In (L/R) Jacks.
Press POWER to turn on the TV. Turn on external
equipment also.
To access Audio/Video inputs, press the INPUT key to
select COMPONENT2.
Notes: DVD Player component output must be set to
Interlaced (480i).
Audio/ Video Input (AV2) and Component inputs
share the same audio (R/L) input jacks.
Connect equipment to the Component2 video
input or the AV2 video input, but not both types at
the same time.
AUDIO VIDEO INPUT
COMP
Pr
Pb
Y
AV2
S-VIDEO
VIDEO
UHF/VHF/CATV
75
AUDIO
OUTPUT
Y
P
B
/C
B
/C
R
P
R
COMPONENT VIDEO OUT
AUDIO OUT
RL
DIGITAL OUT
COAXIAL
S-VIDEO OUT
VIDEO OUT
VIDEO OUT
SELECT
S-VIDEO COMPONENT
R
L
(MONO)
DVD Player
TV BACK
What you will need for connections:
Component video cable – 1
Audio Cable – 1
1 2 3
RESETINPUT
POWER
123
Remote Control
USING THE COMPONENT VIDEO AND AUDIO INPUT JACKS
6
Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
A solid Blue screen with COMPONENT2 displayed
means that the Video mode is selected, but no signal
is being detected at the Component jacks. Check con-
nection, and turn on external equipment.
Press INPUT key after connecting cables to access
the A/V inputs.There is NO need to tune to a blank
channel.