INSTALL BATTERIES AS SHOWN (2 AAA, not included)
Notes:
– Do not mix old batteries with new ones or mix different types of
batteries together.
– Remove the batteries if the remote control will not be used for a
month or more. Weak batteries may leak and cause damage.
(Normal battery life is roughly six months.)
REMOTE CONTROL KEYS
➀
Power Key—Press to turn TV ON or OFF.
➁
Input Key—Press to select the program source to watch:
TV signal or signal from DVD Player or other equipment
you have connected to the A/V jacks.
➂
Number Keys—Press two keys to select a channel.
Example: Press 0 then 6 to select channel 6. For cable
channels 100 through 125, press and hold the 1 key until
C1–– appears. Then press the other two numbers.
➃
Caption Key—(See page 13.)
➄
Menu Key—Use this key with the ▲▼ and – + keys to
navigate and adjust features of the on-screen menu system.
(See pages 11 ~ 12.)
➅
Channel Scanning (CH ▲▼) and Volume (VOL – +)
Keys—Press to scan through the channels in memory and
to adjust the volume.
IMPORTANT NOTE: Spent or discharged batteries must be recycled or
disposed of properly in compliance with all applicable laws. For
detailed information, contact your local County Solid Waste Authority.
(Continued on page 10.
)
USING THE REMOTE CONTROL
■
Be sure batteries are installed correctly.
■
Point the remote control toward the TV. Objects between the
remote control may cause misoperation of the remote control
function.
■
Cannot select channel with number keys. Press “0” in front
of numbers 1~9. Example: Channel 05.
■
Adjusting the volume level: Flashing Right arrow
indicates volume is increasing and flashing Left arrow indi-
cates volume is decreasing.
9
Need help?
Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032
Point towards TV
➠
➁
1 2 3
4 5 6
7 8 9
0
MUTE
MENU
CAPTION SLEEP
RECALL
RESETINPUT
POWER
DISPLAY
123
456
789
0
CH
CH
VOL VOL
➂
➃
➄
➅
➀