12
CONNNECTING EXTERNAL EQUIPMENT
FOR PIP OPERATION
The PIP feature requires two signals to work: You must connect signals to the 75 ohm
terminal and to one set of the A/V jacks; or you must connect signals to both sets of A/V jacks.
CONNECTING A CABLE BOX AND VCR OR TO THE TV
Switch off TV and external equipment before connecting cables. (Cables and splitter
are not supplied.)
1. Connect signal (cable) to splitter
❶
.
2. Connect cable from splitter ❷ to the TV 75Ω (ohm) terminal.
3. Connect cable from splitter
❸ to Cable Box In.
4. Connect cable from cable box out ❹ to VCR Antenna In terminal.
5. Connect VCR’s Audio Out (R/L) and Video Out to the TV
Audio Input (R/L) and Video Input
❺.
For Mono VCR (Single Audio Jack) connect VCR Audio Out to TV Audio (L) Input.
Note: Use either A/V1 or A/V2 Input jacks.
Optional
6. Connect DVD, VCR, DSS, or other equipment’s S-Video Out to the TV S-Video In
jack
❻. Note: Using the S-Video In jack overrides the Video1 Input jack ❻.
7. Press POWER❼ to turn on the TV. Turn on external equipment.
8. Press the INPUT key
❽ to select program source: TV signal or signal from the
equipment you have connected to the A/V1 or A/V2 jacks.
Follow the same procedure to connect other compatible video equipment to either
set of A/V jacks.
QuickTips
■
Make sure all cable
connectors are fully
seated on jacks.
■
Always match cables
according to the
colors;
RED for right
audio,
WHITE for left
audio and
YELLOW for
video.
■
A/V1 and A/V2 jacks
have identical
functions. Any
compatible video
equipment can be
connected to either
set of jacks.
■
A solid Blue screen
with the word Video1
or Video2 displayed
means that the Video
mode is selected, but
no signal is being
detected at the
Video jack. Check
connection, and
turn on external
equipment.
■
Make sure you select
TV channel to match
your VCR output
(Ch. 3 or 4).
■
You may be able to
use the remote
control to operate
your VCR, Cable
Box, and DVD.
(See pages 7 ~ 8.)
Need help?
Visit our Web site at
www.sanyoctv.com
or Call 1-800-877-5032
IN OUT
UHF/VHF/CATV
75Ω
(MONO)
AUDIO VIDEO INPUT
VIDEO
AV1AV2
AUDIO
S-VIDEO
INPUT
R
L
R R
L L
(MONO)
AUDIO
OUTPUT
FROM ANT.
OUT TO TV
CH3 CH4
RF
CHANNEL
IN
OUT
L- -RAUDIOVIDEO
L- -RAUDIOVIDEO
A/V JACKS
IN
OUT
S-VIDEO OUT
RL
OUTPUT
AUDIO OUT
VIDEO OUT
❸
VCR Back
❹
❺
❷
➊
RESETINPUT
POWER
VCR TV AUX
123
123
❽
Remote Control
❻
❼
Splitter
Cable Box Back
TV Back
DVD Player
Back