Filter
Top Products
18
ASPECT RATIO
Select screen size among “Wide”, “Super Live 2 “, “Cinema2”,
“4:3”,“Super Live 1”,“Cinema 1”, “Subtitle”,“14:9” and “Auto” by
pressing WIDE button on Remote Controls.
*Only “Wide”and“4:3” mode can be selected when the input
mode is “VGA”, “HDMI” and the input signal is 1080i, 720p or
1080p.
WIDE
Use this setting when watching a widescreen DVD,widescreen
video tape or a 16:9 broadcast (when available).
Due to the range of widescreen formats (16:9,14:9,20:9 etc.)
black bars may be visible on the top and bottom of the screen.
SUPER LIVE 2
If a‘side panel format’signal is being received this setting will.
enlarge the image to fit the screen by stretching the image
horizontally and vertically, holding better proportions at the
centre of the image. Some distortion may occur.
CINEMA 2
When watching ‘all sides panel format’ films/video tapes, this
setting will eliminate or reduce the black bars at all sides of
the screen by zooming in and selecting the image without
distortion.
4:3
Use this setting to view a true 4:3 broadcast.
SUPER LIVE 1
This setting will enlarge a 4:3 image to fit the screen by
stretching the image horizontally and vertically, holding better
proportions at the centre of the image. Some distortion may
occur.
CINEMA 1
When watching ‘letterbox format’ films/video tapes, this setting
will eliminate or reduce the black bars at the top and bottom
of the screen by zooming in and selecting the image without
distortion.
SUBTITLE
When subtitles are included on a letterbox format broadcast, this.
setting will raise the picture to ensure.
that all the text is displayed.
14:9
Use this setting when watching a 14:9 broadcast.
Auto
WIDE button
SUPER LIVE 1
SUPER LIVE 2
CINEMA1
CINEMA2
SUBTITLE
SUBTITLE
WIDE
4:3
14:9
Auto
BASIC OPERATION