Sanyo PLC-XP57L Projection Television User Manual


 
22
BASIC OPERATION
ADJUSTING SCREEN
“Zoom” disappears after 4 seconds.
“Focus” disappears after 4 seconds.
ZOOM ADJUSTMENT
FOCUS ADJUSTMENT
1
Press the ZOOM button on the top control or ZOOM /
buttons on the remote control. “Zoom” appears on the screen.
2
Press the ZOOM button or POINT UP button to make the
image larger, and press the ZOOM button or POINT DOWN
button to make the image smaller.
1
Press the FOCUS button on the top control or FOCUS /
buttons on the remote control. “Focus” appears on the screen.
2
Adjust the focus of image by pressing the FOCUS / buttons
or POINT UP/DOWN buttons.
LENS SHIFT ADJUSTMENT
1
Press the LENS SHIFT button on the top control or LENS SHIFT
/ buttons on the remote control. “Lens shift” appears on the
screen.
2
Press the POINT UP button or LENS SHIFT button to move
the image up, press the POINT DOWN or LENS SHIFT button
to move the image down.
KEYSTONE CORRECTION
1
Press the KEYSTONE button on the remote control or select
Keystone in the SETTING Menu. (See page 38.) The Keystone
dialog box appears.
2
Correct keystone distortion by pressing the POINT
UP/DOWN/LEFT/RIGHT buttons. Press the POINT UP button to
reduce the upper part of the image; press the POINT DOWN
button to reduce the lower part. Press the POINT LEFT button to
reduce the left part; press the POINT RIGHT button to reduce
the right part.
Reduce the upper width
with POINT UP button.
Reduce the lower width
with POINT DOWN button.
If a projected picture has keystone distortion, correct the image with the Keystone function.
Reduce the left part with
POINT LEFT button.
Reduce the right part with
POINT RIGHT button.
Arrows are white when no correction.
Arrow(s) in the corrected direction turn(s) red.
Arrow(s) disappear(s) at the maximum correction.
If you press the KEYSTONE button on the remote
control once more while the Keystone dialog box is
being displayed, the Keystone function is canceled.
“Keystone” disappears after 10 seconds.
NOTE:
Focus adjustment may not function properly if the image is corrected by the
Keystone function.
“Lens shift” disappears after 4 seconds.