Filter
Top Products
23
Press the FREEZE button on the remote control to freeze the picture on the screen. To cancel the FREEZE
function, press the FREEZE button again or press any other button.
Press the NO SHOW button on the remote control to black out
the image. To restore to normal, press the NO SHOW button
again or press any other button.
NO SHOW FUNCTION
PICTURE FREEZE FUNCTION
“No show” disappears after 4 seconds.
1
2
Press the MENU button to display the On-Screen Menu. Press
the POINT LEFT/RIGHT buttons to move the red frame pointer
to the SOUND Menu icon.
Volume
Press the VOLUME (+/–) buttons on the top control or on the remote
control to adjust the volume. A Volume dialog box appears on the
screen for a few seconds.
Press the VOLUME (+) button to increase the volume; press the
VOLUME (–) button to decrease the volume.
Mute
Press the MUTE button on the remote control to turn off the sound. To
restore the sound to its previous level, press the MUTE button again
or press the Volume (+/–) buttons.
To increase the volume, press the POINT RIGHT button; to decrease
the volume, press the POINT LEFT button.
Press the POINT UP/DOWN buttons to move the red frame
pointer to the desired item, and then press the SELECT button.
SOUND ADJUSTMENT
DIRECT OPERATION
MENU OPERATION
Volume
Indicates an approximate level of the volume.
Press the MUTE button to set
the Mute function On or Off.
The Volume dialog box disappears after 4 seconds.
SOUND MENU
Press the POINT LEFT/RIGHT buttons to turn off the sound. The
Dialog box display is changed to “On” and the sound is turned off. To
restore the sound to its previous level, press the POINT LEFT/RIGHT
buttons again.
Mute
BASIC OPERATION
Closes the SOUND Menu
Indicates an approximate
level of the volume.
SOUND Menu icon
Press the P-TIMER button on the remote control. A Timer
display “00 : 00” appears on the screen and starts to count time
(00 : 00–59 : 59).
To stop the P-TIMER, press the P-TIMER button. Press the P-
TIMER button again to cancel the P-TIMER function.
P-TIMER FUNCTION
Built-in SP.
Press the POINT LEFT/RIGHT buttons to switch the built-in speaker
On or Off.