Filter
Top Products
PROGRAM TIMER RECORDING
Using Timer Recording for Several
Programs
If two or more programmed recording times overlap on
the same day, the VCR will not begin recording a new
program until the previous program has ended (as shown
below).
Program Recording Order
TIMER SETTING NOTES:
œ
If the programmed recording falls on a Saturday or a
Sunday, the Daily recording mode will not be possible.
œ
To select the A/V recording mode, press the
INPUT
button instead of selecting a channel number.
œ
Timer recording is not possible through the front
AUDIO/VIDEO input jacks.
œ
12:00 PM = noon; 12:00 AM = midnight.
œ
If the end of the tape is reached during timer recording,
the VCR stops and the power turns off automatically.
œ
If the power fails or the VCR is unplugged from the
AC outlet, the correct clock time and timer settings
are kept in memory for approximately 1 hour. After
1 hour, the clock and program timer must be reset
when power is restored. Refer to INITIAL SETUP to
set the VCR.
Program
7:00PM
These portions will
not be recorded
10:00PM8:00PM 9:00PM
SC4H/CA3 (VHR-H690 GB) Tue. Mar. 14/2000
37