Filter
Top Products
COPYING A TAPE
You can copy recordings (such as home videos) from one
tape to another using two VCRs.
1
Connect the VCRs as shown.
2
Insert the recorded cassette into VCR 1.
3
Insert a blank tape into VCR 2.
4
Set the desired recording speed on VCR 2.
5
Turn on the TV and set it to channel 3 or 4.
If you use this model as VCR 2 to record:
œ
Press the
INPUT
button on VCR 2 to select the rear
input jacks.
The AV indicator “L1” is displayed instead of a channel
number.
NOTE:
When using the front AUDIO/VIDEO input jacks,
press the
INPUT
button until the AV indicator “L2” is
displayed.
6
Press the
TV/VCR
button on VCR 2 to select the
VCR mode.
7
Place VCR 2 in the record/pause mode.
8
Press
PLAY
on VCR 1.
9
When the tape in VCR 1 has reached the desired
point, press (release)
PAUSE/STILL
on VCR 2.
Recording begins.
F
Press
STOP
(or
STOP/EJECT
on the front panel) on
both VCRs when finished.
MAINTENANCE
Head Care and Cleaning
œ
This VCR has a built-in automatic head cleaner.
Under
normal conditions
, the heads should not require
additional cleaning. If you suspect a problem, contact a
factory-authorized service center.
Cabinet Cleaning
œ
Clean the outside of the cabinet with a clean, soft cloth,
moistened with lukewarm water and wrung dry.
DO NOT USE SOLVENTS OR OTHER TYPES OF CLEANSERS. THESE CHEMICALS CAN CRACK OR
DISCOLOR THE CABINET.
VIDEO
AUDIO
L
R
VIDEO
AUDIO
L
R
TO TV
OUT
INOUT
VCR 1:
To play back
VCR 2:
To record
Audio connection cable
(not supplied)
Video connection cable
(not supplied)
TV
SC4H/CA3 (VHR-H690 GB) Tue. Mar. 14/2000
40