Filter
Top Products
SCEPTRE X19 HDTV User Manual
- 37 -
www.SCEPTRE.com
Problems Solutions
HDCP VIDEO SAYS NO
HDCP SUPPORT
Reboot your HDCP video device but turning them off and unplugging the
power cord. Wait up to 8 minutes to plug the power back in to see if it
works or not.
HDCP VIDEO HAS NO
AUDIO
Make sure you have a 3.5 mm mini-jack cable connected from your
HDCP video device’s sound output to the TV’s VGA STEREO INPUT. If
your HDCP video device uses RCA AUDIO jacks, you’ll need to obtain a
RCA audio converted into 3.5 mm mini-jack cable.
CANNOT GET
1440x900 ON PC VGA
1440x900 is a widescreen resolution. If your video card cannot achieve
the resolution, please try updating the video card’s drivers to the newest
version. If that does not work, you’ll need to think about upgrade the
video card to one that is capable of achieving that resolution.
PICTURE IS
DISTORTED OR HAS
ABNORMAL SOUND
This might be from interference from large electrical appliances, cars,
motorcycles, or fluorescent lights. If the TV is close to the wall, try
moving the TV to another room in your house to see if the problem still
occurs.
PICTURE DOES NOT
COVER THE ENTIRE
SCREEN
If you’re using HDMI or a TV digital channel make sure you use the
ASPECT button to switch to FULL format. If you are using VGA, use the
AUTO ADJUST function to adjust to the screen. Please Note : If you
are using regular analog TV, AV, or component in 480i resolution, use
the ASPECT button to switch to FULL in order to fill up the screen.
Please Note : This note this feature will distort the picture.
PICTURE QUALITY IS
HORRIBLE!!
For best image quality, view HD widescreen programs where possible. If
HD content is not available view “Standard Definition” from a digital
source. Standard, analog TV will always be noticeable inferior to HD
because your X19 LCD HDTV has video that is many times better than
old TV’s and so you can see interference and deficiencies you did not
KNOW you had.
PICTURE HAS PIXELS
THAT ARE ALWAYS
DISPLAYING THE
SAME COLOR
Your X19 LCD HDTV is manufactured using an extremely high level of
precision technology, however, sometimes some pixels of your X19 LCD
HDTV may not display. Pixels defects within industry specifications are
inherent to this type of product and do not constitute a defective product.
SWITCHING A CHANNEL
OR SOURCE CHANGES
THE VOLUME
Different channels and inputs will sometimes have this effect because
the channel signal’s own volume is already loud. There is no way
remove this completely. The TV has an AUTO VOLUME LEVEL
function that can combat this type of effect. Please make sure that
function is turned on.
THERE IS NOISE OR
TRASH PIXELS ON THE
SCREEN
When your LCD HDTV’s resolution is higher than the digital channel’s
broadcast resolution, the signal is up-converted to match your TV’s
resolution. Up-converting can cause this type of effect.
TIPS FOR HIGH
DEFINITION USERS
The X19 LCD HDTV is an ideal platform for viewing High Definition
Content. The best image quality can be achieved by HDMI, YPbPr
(Component), then VGA. However, due to variances in broadcast
practices, it is possible some image distortions can occur.
TIPS FOR LETTERBOX
CONTENT USERS
Letterboxed (Widescreen) versions of DVD movies are most commonly
formatted for standard 4:3 TVs. The X19 LCD HDTV has the capability
of expanding this content so the entire screen is filled at the expense of
the image proportion. To use this function press the aspect button on
the remote control and cycle among the available options.
I CANNOT FIND THE
VOLUME AND CHANNEL
CHANGING BUTTONS
The buttons are represented by the ▲▼◄► buttons located on the
remote control. ▲▼ changes the channels and ◄► changes the
volume.
I CANNOT FIND ENTER
BUTTON
The enter button has the symbol ↵. It is located in the center of the
▲▼◄► buttons.
TV TURNS OFF
AUTOMATICALLY
AFTER 5 MINUTES
The TV features a power saving mode which will automatically turn off
the TV, if there’s no signal provided for more than 5 minutes.