Filter
Top Products
27
Using the ExplorUsing the Explor
Using the ExplorUsing the Explor
Using the Explor
er 3170HD Set-Ter 3170HD Set-T
er 3170HD Set-Ter 3170HD Set-T
er 3170HD Set-T
opop
opop
op
After you set up your Explorer 3170HD
Set-Top, and the front panel displays the
current time, you can turn on the set-top
and begin watching TV. Press the POWER
button on the front of the set-top to turn it
on.
Your cable service provider will send
nightly programming updates to your set-
top (such as program guide information).
You should leave your set-top on at all
times so that it can receive these updates.
Using the Mode Keys
Your remote can operate your set-top and
your HDTV, plus two other devices that
you have set up with your remote. The
mode keys across the top of your remote
let you specify the device you want to
control:
• AUX controls a CD player, receiver,
amplifier, or other audio devices.
• VCR controls a VCR or DVD player.
• TV controls a television.
• CBL controls your set-top.
If you prefer, you can set up some of these
mode keys to operate other devices. For
example, you can set up your AUX key to
operate a second VCR. See Setting Up
Advanced Features for the Remote
earlier in this guide.
Note: Some of the remote keys may be
disabled in various modes. For example,
Play, Fast Forward, and Rewind do not
function in TV mode.
Watching TV
The following keys provide basic control
for your set-top and remote:
• To turn your set-top on, press TV and
then POWER on the remote control.
• To change the channel, use CH+ and
CH- on the remote control.
• To adjust the volume, use VOL+ and
VOL- on the remote control.
• To view more information about the
current program, press INFO.