Filter
Top Products
8
BefBef
BefBef
Bef
oror
oror
or
e e
e e
e
YY
YY
Y
ou Beou Be
ou Beou Be
ou Be
gingin
gingin
gin
• Read the IMPORTANT RULES FOR
SAFE OPERATION section of this
guide.
• Locate the serial number for your set-
top, which is on a bar code on the back
panel of the set-top. You will need this
serial number to join the Explorer
eClub. Also, if your system requires
troubleshooting in the future, your
cable service provider or Scientific-
Atlanta may ask for the serial number.
• If you plug the set-top into an outlet
that is controlled by a wall switch, keep
the switch in the ON position. The on-
screen guide is updated nightly. If the
wall switch is in the OFF position,
your set-top will not receive the latest
programming updates.
• Keep the top of the set-top free of all
objects and electronic devices, including
your TV.
• It is recommended that you connect a
surge protector to your cable equip-
ment and electronic devices.
Back Panel Connectors
1 Connect the HDTV (Y, Pb, and Pr)
output ports to the HDTV input on
your HDTV. You must use these ports
to provide HDTV signals to your
HDTV.
2 Record your serial number and MAC
address shown on this label in the
Reference Numbers section of this
guide. These numbers provide
information about your set-top.
3 Attach the IR Blaster cable to use
with the optional VCR Commander
Service. See Setting Up the VCR
Commander Service later in this
guide.
4 Connect an S-Video cable to send an
S-Video signal to your TV or VCR.
This signal is SDTV but higher-
quality than other SDTV connections.
5 Connect an RCA cable to Digital
Audio Out to send a digital audio
signal to a surround-sound receiver or
other digital audio device.
6 Connect an RCA cable to Video Out to
send a regular video signal to your TV
or VCR. This signal is SDTV.
7 Connect RCA cables to Audio Out to
send analog audio signals (left and
right) to a stereo receiver or a TV with
stereo inputs.
8 Connect a coaxial cable to Cable Out
to send analog audio and video signals
to a TV or VCR. These signals are
SDTV video with mono audio.
9 Connect the coaxial cable that delivers
the signal from your cable service
provider.
10 Connect an optional RF Bypass
module to your set-top. This module
allows you to view one channel while
recording another. Contact your cable
service provider to see if this service is
available.
11 Connect the power cord for another
device to deliver power to that device.
12 Connect the power cord provided to
deliver power to the set-top.
IR
VIDEO
OUT
L
R
CABLE
OUT
CABLE
IN
THIS DEVICE IS INTENDED TO BE ATTACHED
TO A RECEIVER THAT IS NOT USED TO
RECEIVE OVER-THE-AIR BROADCAST
SIGNALS. CONNECTION OF THIS DEVICE
IN ANY OTHER FASHION MAY CAUSE
HARMFUL INTERFERENCE TO RADIO
COMMUNICATIONS AND IS IN VIOLATION
OF THE FCC RULES, PART 15.
AVIS:
RISQUE DE CHOC
ELECTRIQUE NE PAS OUVRIR
120 VAC
60HZ 5A
120 VAC
60HZ 80W
AUDIO
OUT
DIGITAL
AUDIO
OUT
S-VIDEO
OUT
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
YPr
Pb
HDTV
T10346
4 5 987263 11101
BYPASS
0003B4287797
SABDQXTL N0006246618