Filter
Top Products
ST12450W/WD Installation Guide, Rev. B 17
11
No terminator power. See Section 11.7.3.4 in the
Barra-
cuda 2, 2HP Product Manual.
12
Seeking is defined as a third-stroke seek at OD. The
command is issued every 20 msec.
13
Read track is defined as repeat reads of track 15 with a
60% duty cycle.
Initial setup information
The following topics are presented to guide you through
the installation process. These topics are presented in
the order you should follow to properly install the drive.
• Setting the SCSI ID jumpers
• Terminating the drive
• Changing other applicable jumper options
• Synchronizing spindles in multiple-drive configurations
(optional)
• Providing adequate cooling
• Mounting the drive and connecting cables
• Formatting the drive
Several illustrations are provided to make the installation
process easy.
Write down the original jumper settings before you make
any changes. This makes it easy to revert to the original
configuration if necessary.