Filter
Top Products
Product Overview
Pictured below are the components included with a 110VAC Remote Power On/Off system. The items in the center picture represent a
PP02 model. Note: A documentation CD-ROM may have been included instead of the printed manual. The items shown on the left are the
additional items included with a PP03 model. The items shown on the right are the additional items included with a PPNT model. Beyond
the additional items, the programming in the main unit also varies between each model.
Identifying your Remote Power On/Off version:
There are three distinct versions of Remote Power On/Off. They are Power On/Off +Aux (model #PP02), Power On/Off +Aux
ShutDown/reBOOT for Windows 95/98/ME (model #PP03), and Power On/Off +Aux ShutDown/reBOOT for Windows NT/XP/2000
(model #PPNT). Each version can be identified by the writing on the front bezel of the main control unit and the label on the bottom:
Identifies the unit is a non-ShutDown version (model #PP02), or was originally a
non-ShutDown version [which may have been upgraded; check label on bottom].
Useful with DOS systems, Windows 3.x systems, and any AC device that does not
require an orderly operating system shut down.
Identifies the unit is a ShutDown version. A label on the bottom will indicate it is
either for Microsoft's Windows 95 (model #PP03) or Windows NT (model #PPNT).
See the appropriate AppendixB or C for more information.
Remote Power On/Off Product Overview • 7